Tuesday, March 31, 2015

DIY | FITTED SHEETS


It all started with a foam mattress, the one that came with the second-hand cot that we bought for Audrey. Well... it started with the foam mattress, my love for vintage sheets, and the need to personalize Audrey's room a bit...













It all started with a foam mattress, the one that came with the second-hand cot that we bought for Audrey. Well... it started with the foam mattress, my love for vintage sheets, and the need to personalize Audrey's room a bit...

Ahem. And the fact that I had just wrapped a poorly sized piece of fabric over the mattress for well over a year (yes, I washed it and put it back on the mattress.)

Okay. Basically I was shamed into making something nice for Audrey's bed. Because it was pretty ghetto before. The good news is that it turned out to be REALLY easy. Like. Really easy. The bad news is that it took me SO LONG TO DO SOMETHING ABOUT IT! Sorry, Audrey.


You'll need:
A bit of fabric (enough to cover the mattress and wrap around the sides)
Thread
80" of skinny elastic
A safety pin (or bobby pin)


1. Lay the fabric out and measure the outline of the mattress top. Add the height of the mattress plus 3-4 inches (For me, this measurement added up to 8") to each side. Your fabric should look something like the picture above after it's been cut out.

2. With the right sides of the corner together, sew along the edge to form a seam. This will become the edge that fits around the corners of the mattress. Repeat with all four corners.

3. Finish the entire outside edge using a serger or the zig zag stich on your sewing machine.

4. Iron 1" of the edge under all the way around the sheet. This will create a casing for the elastic to feed through.

5. Sew down the casing making sure to leave enough room for the elastic to feed through stopping 2 inches before you started. This is the opening that you will feed in the elastic.

6. Insert the elastic and thread through the casing until it comes out the other side.

7. Overlap the ends of the elastic and stitch them together securely. (or cheat like me and tie them together really tightly.) Then sew your casing closed.

8. Congratulations! You just made a custom fitted sheet. What a crafty one you are.


Now Audrey has real handmade linens! And I'm no longer a terrible mother ;)

Win win.

xoxo 

Check out Talia's Homemade Baby Wipes!



Talia lives in New Zealand with her husband, Mr. Philip van der Wel and their 2.5 children. Talia writes a self titled blog which is a snapshot of their daily lives and her crafty side. She is also a blog designer (responsible for many recreations of The Beetle Shack) and tech guru with infinite knowledge around blogging and design. When writing for The Beetle Shack, Talia will share craft and sewing tutorials along with other helpful household hints.

8 comments:

  1. This is pretty nifty and looks easy. Have you ever done it with adult sized sheets? The problem would be buying wide fabric as who wants seams under your back. Thanks for the post!

    ReplyDelete
  2. Wow! This looks like something I could manage. So much prettier than anything you could by at the shops!

    ReplyDelete
  3. Thanks so much for the tute, the sheet is gorgeous!
    Sandy, I would love to know where to buy fabric wide enough, wouldn't that be great.

    ReplyDelete
  4. It’s difficult to find knowledgeable people in this particular topic, but you sound like you know what you’re talking about! Thanks. Find Outdoor Games Information. Best Swimming Goggles

    ReplyDelete

Thanks so much for your words of encouragement, advice and solidarity.

xo em